The Newest Ultra Fine Grinding mill for Talc

Introduction of Talc: Talc is used in many industries such as paper making, plastic, paint and coatings, rubber, food, electric cable, pharmaceuticals, cosmetics, ceramics, etc. A coarse grayish-green high-talc rock is soapstone or steatite and has been used for stoves, sinks, electrical switchboards, crayons, soap, etc. It is often used for surfaces of lab counter tops and electrical switchboards because of its resistance to beat, electricity and acids. Talc finds use as a cosmetic, as a lubricant, and as a filler in paper manufacture. Talc is used in baby powder, an astringent powder used for preventing rashes on the area covered by a diaper. It is also used as food additive or in pharmaceutical products as a glidant. In medicine talc is used as a pleurodesis agent to prevent recurrent pleural effusion or pneumothorax. Talc is widely used in the ceramics industry in both bodies and glazes. In low-fire artware bodies it imparts whiteness and increases themal expansion to resist crazing.

Introduction of Talc ultra fine grinding mill:
Talc powder has a widely applications. In order to expand the talc's application, Clirik desiigned a new type of ultra fine grinding mill to meet demand of market

Application of ultra fine grinding mill:
 Producing fine and super fine powder of non-inflammable, non-explosive and brittle materials with Moh's hardness under six, the moisture under 5%.

Working principle of ultra fine grinding mill:
The main bearing and each dial are driven by electromotor of main machine through reducer, and numbers of rollers, which are rolling in the ring, are driven by dial through plunger. After crushed by hammer crusher, the big materials become small ones and are sent to storage hopper by elevator and further sent to the middle of first dial evenly by the electromagnetic vibrating feeder and feeding pipe. The materials will be driven to the edge of dial by centrifugal force and fall down into the ring, crushed and grinded by roller, and become powder after production of three rings. The high pressure centrifugal blower will inhale air from outside and blow the crushed materials to classifier. The rotating turbo in the powder concentrator will make the coarse materials return to the mill and reground, while the fineness will mix with the air and go into the cyclone and be discharged in the discharge bin, which is at the bottom of it. The air, which mixed with very little fineness, will be purified by impulse duster and discharged by blower and muffler.

Shanghai clirik machinery co., LTD.
Should you have any questions on our ultra fine mill, ultra fine grinding mill, ultra fine grinder, ultra fine grinding machine. please do not hesitate to contact us.
Phone: 4008-168-355; 0086-21-20236178;86-18918057603
Contact person: Esther Wang
Email:clirik-esther@clirik.com
Online consulting: http://www.stone-mills.com
http://www.stone-mills.com/products/index.html
Address: No.19 Fuqing Rd, Pudong New Area, Shanghai201201, China.