How to use ultra fine grinding machine

The ultra fine grinding machine is utilized in a machine shop for various purposes such as finishing, forming, sharpening, cutting, roughing, snagging, cleaning, polishing, buffing, etc. However, while operating a grinding machine, it may cause serious injuries to the machine operator or any person nearby. Hence, it is essential to observe the following safety precautions, in order to use a grinding machine safely, and thus avoid any injuries.
Always wear goggles during all grinding machine operations.
Verify grinding wheels for cracks before mounting.
Never operate grinding wheels at speeds exceeding the recommended limit.
Never adjust work mounting devices or workpiece while the machine is operating.
Never exceed recommended depth of cut for grinding wheel or machine.
The workpiece must be removed from the grinding wheel before turning off the machine.
Sufficient wheel guards must be used.
The tool rest must be kept at proper distance from the wheel.
Machine guards must be in place and function properly.
Only those persons who are authorized as trained and competent operators must be allowed to operate the machines.
It is mandatory to provide sufficient instructions to the operators, and also constantly supervise the machine operations.
The machine must not be utilized to carry out tasks beyond its specific capacity.
The operator must operate only one machine at a time.
Make sure that the workspace is clean and dry before using the machine, as slippery flooring may cause injuries.
All operators must wear suitable personal protective equipment.
It is compulsory to wear eye protection equipments.
Operators must also wear close fitting protective clothing. This is necessary as loose clothing items such as ties and shirt sleeves are likely to get entangled in the moving machine parts.
Persons with long and loose hair must properly tie them.
Dust masks must be put on in highly contaminated or dusty surroundings.
It is also compulsory to wear a hearing protection.
Operators must always wear sturdy footwear in the work areas.
Everyone must wear hand gloves while operating the machine.
Operators must not wear watches, rings, or any other jewellery or accessory.
If a person has put on any medical alert identity, it must be taped.
Always utilize the right kind of grinding wheel.

Phone: 4008-168-355; 0086-21-20236178;86-18917951321
Contact person: Esther Wang
Email:clirik-esther@clirik.com;
Msn:esther-clirik@hotmail.com
Skype:esther-clirik
Online consulting:  http://www.ultra-mill.com
Address: No.19 Fuqing Rd, Pudong New Area, Shanghai201201, China.