European Version Coarse Hammer Crusher in China
European Version Coarse Hammer Crusher is engaging in crushing various rocks and stones with comprehensive strength not higher than 320 MPa into coarse powder and small particles, it is widely used in metallurgy, mining, chemical, cement, coal, sand-making, coal gangue, construction, refractory materials, and ceramic industries.
European version coarse hammer crusher mainly consists of frame, rotor, support iron, and grates bars.
The frame is divided into two parts: the upper part and the lower part, which are welded by steel plates after being cut. Liners made of high mangaese steels within the frame can be replaced after being worn out.
The rotors consist of turn plates, pin shafts, and hammers which are grouped regularly in the main shaft. The main unit drives the main shaft through the motor and triangle belts, which, in turn, rotates the rollers.
Large materials entering the crusher through the feed inlet are firstly crushed by the high-speed hammers and then thrown fiercely to the support iron for further crushing. Qualified materials crushed will be screened out and exit from the gap of the grate bars while the unqualified will be left in the crushing cavity to be further hammered and ground until reach the standard size.
The size of the final product can be adjusted by changing the grate bars can also be adjusted according to different requirements. To avoid the plugging of the crusher, the proportion of water for the crushing materials is no more than 20%.
Advantages and Features of European Version Coarse Hammer Crusher
• High capacity and low powder consumption
• Uiform particle size with high crushing and crushing ratio
• Simple structure
• Easy operation, low investment
The Main specification of Shanghai European Version Coarse Hammer Crusher:
| Type | PC4008-75 | PC40012-90 | PC40015-132 |
|
Rotor Diameter/mm |
750 | 900 | 1150 |
|
Rotor Width/mm |
800 | 1200 | 1500 |
|
Rotor Speed r/min |
800-1000 | 800-1000 | 550-800 |
|
Feed head size/mm |
320*930 | 400*1200 | 500*1500 |
| Feeding Size/mm | ≤50 | ≤60 | ≤80 |
| Finished Size/mm | ≤3 | ≤3 | ≤8 |
| Capacity t/h | 10--30 | 30--60 | 50--100 |
| Powder/kw | 55-75 | 75-90 | 110-132 |
| Hammer Number (piece) | 18 | 32 | 32 |
| Overall Size L*W*H/mm | 2310*1665*1610 | 2840*2100*2020 | 3720*2650*2540 |
Note: Any changes of technical data shall not be prior advised.
Company strength
SHANGHAI CLIRIK MACHINERY CO., LTD located in PUDONG New district of Shanghai china as a pioneer enterprise, which is specializing in research, manufacture and sales of all kinds of mining equipment. Our company has already formed a full set of modern production line, equipped with intelligent, standardized testing and controlling laboratories, owned a professional team for R&D, production, sales and service.
So far, we have established a whole production chain, the products covermicro powder grinding mill, high pressure grinding mill, European version coarsegrinding mill, hammer crusher, jaw crusher, screw conveyor, bucket elevator and so on. They are widely used in the industry of mining, construction materials, chemicals, metallurgy, transportation, hydraulic engineering and so on. Specially we independently developed HGM micro powder grinding mill, which are not only renowned in domestic market, but also have been sold widely in Eastern Europe, Middle East, Africa, South Asia, Southeast Asia, Oceania, and America, etc.
We still insist on the communication and cooperation with prestigious scientific research institutions from both home and abroad to make our development ability always is in the domestic front. Based on the principle of constant innovation and quality guarantee, customer foremost, we are able to provide our customers not only the highest quality products at the most favorable price but also the most reasonable solution, such as the selection of the equipment,optimized process configuration and a full range of technical support, therefore we always follow your steps, pursue your value and achieve your benefit.
