Ultrafine grinding mill can process 200, 300, 400, 600, 800, 1250, 2000, 3000meshs ultrafine powders


Clirik HGM series ultrafine grinding mills, YGM series high-pressure grinding mills are specialized in processing 200meshs, 300meshs, 400meshs, 600meshs, 800meshs, 1250meshs, 2000meshs, and 3000meshs etc. ultrafine powders which can reach various kinds of fineness. The common powder has quartz powder (silicon powder), barite micro powder, Heavy calcium powder, calcite powder, dolomite powder, feldspar powder, coal ash powder, slag powder etc. powders from barite materials with low and medium hardness.
The whole sets of HGM series ultrafine grinding mills contain crusher, bucket elevator, storage hopper, vibrating feeder, main unit of grinder mills, classifier, powder collector, dust cleaner, muffler, induced draft fan, and Siemens electric control system.
Working principle of HGM series ultrafine grinding mills
The main bearing and each dial are driven by electromotor of main machine through reducer, and numbers of rollers, which are rolling in the ring, are driven by dial through plunger. After crushed by hammer crusher, the big materials become small ones and are sent to storage hopper by elevator and further sent to the middle of first dial evenly by the electromagnetic vibrating feeder and feeding pipe. The materials will be driven to the edge of dial by centrifugal force and fall down into the ring, crushed and grinded by roller, and become powder after production of three rings. The high pressure centrifugal blower will inhale air from outside and blow the crushed materials to classifier. The rotating turbo in the powder concentrator will make the coarse material return to the mill and reground, while the fineness will mix with the air and go into the cyclone and be discharged in the discharge bin, which is at the bottom of it. The air, which mixed with very little fineness, will be purified by impulse duster and discharged by blower and muffler.
 
Share this artical: